Cutting System 81428925 Shaving Head Knife Block Stainless Steel Blades Compatible with Braun Hair Clipper HC3050, HC5010, HC5030, HC5050, HC5090, HC5310, HC5330, HC5350, CruZer5 head
Price: €25.70
(as of Feb 15, 2026 02:28:04 UTC – Details)
The cutting system 81428925 is a complete cutting unit (shaving head/blade block) for Hair Clipper from the HC series. It replaces the knife block with movable top, fixed bottom blade, guide rods, torsion springs and carrier plate. Stainless steel blades cut into counterconductor; factory lubrication on the slide piece reduces friction and running noise. The goal is to restore cutting performance in case of reduced sharpness or damaged teeth.
Compatible with Braun Hair Clipper HC Series: The cutting system 81428925 fits when your device is wearing a suitable type. The type can be found as a four-digit number on the back. For this part, 5427 and 5429 have been released. Please check the type before ordering to ensure the fit and function
Compatibility: type 5427, compatible with brown models: HC3050, HC5010, HC5030, HC5050, HC5310, HC5330, HC5350 and the family CruZer5 head and Old Spice. Color advices do not change the fit; the type and model remain decisive.
Compatibility: type 5429, compatible with Braun models: HC5090 and HC7390. Important is always the type number, as it describes the mechanical platform.
Not compatible: not compatible with Braun BT beard trimmers (e.g. BT5090 and successor), not compatible with Braun MGK/Multigroom, not compatible with series shavers (e.g. Series 1/3/5/7; 30B/51S/52B/53B) and not compatible with length attachments or EasyClick. These products use other cutting or mortise systems. Use the information compatible with Braun Hair Clipper HC series and the type list as test criteria.
Construction and material: the finely toothed blade comb guides the hair safely to cut. The upper blade oscillates over the lower blade, the suspension keeps the pressing force constant. The carrier plate is robust, guide parts are precisely tuned. Compatible with Braun designed, the lubrication on the white slide support the quiet run.
Installation – briefly explained: 1) disable device. 2) Grab the old shaving head at the front and pull straight forward. 3) Clean the seat and drive with a brush. 4) Align new cutting system and click on until clicking. 5) Turn on briefly and check the even run. Applies to compatible with Braun Hair Clipper of the listed types.
Care – for a constant cutting quality: brush hair after each use. If necessary, rinse briefly, then dry completely. Put one to two drops of knife oil on the tooth comb and turn on the device briefly. This care reduces friction and extends the life of the Braun cutting system.
Technical notes: replacement cutting system 81428925, color black/silver. Unit of top/bottom sheet, guide, springs and carrier plate. Compatible with Braun Hair Clipper HC models according to the list. Supplied without attachments, no oil, no tools. Size tolerances are normal; the function depends on the correct type assignment.
Replacement advantages: a new cutting unit restores the original cutting geometry. The cutting ability increases, pulling decreases, the cut becomes more even. Especially with dense hair, a sharp, compatible Braun-tuned cutting system is crucial.
Note on the model designation: On the front is usually HCxxxx, but the four-digit type on the back is decisive. Only if your type is 5427 or 5429, this cutting system is compatible with Braun Hair Clipper according to the list
Overview – Full compatibility list: 1) Compatible with Braun Type 5427: HC3050, HC5010, HC5030, HC5050, HC5310, HC5330, HC5350, CruZer5 head, Old Spice. 2) Compatible with Braun Type 5429: HC5090, HC7390
Applications: head hair and short beards. Suitable for dry use; clean it compatible with Braun cutting system after each use. For damp cleaning, rinse only briefly and dry completely.
Safety and use: Do not feed the device with excessive pressure. Use only intact chargers/power supplies. Check that the device is compatible with the Braun cutting system regularly for damage; replace if bent teeth. Keep out of reach of children.
Question 1: Is the cutting system compatible with Braun Hair Clipper from my HC series? Answer: Yes, if your device is in type 5427 or 5429 and the model is listed
Question 2: Does it fit Braun BT or MGK trimmers? Answer: No. It is not compatible with Braun BT beard trimmers and is not compatible with Braun MGK/Multigroom and is not compatible with series series film cleaners.
Question 3: How do I find the right type? Answer: On the back of the device. Only type 5427 or 5429 are compatible with Braun cutting system 81428925. In addition, the model number (e.g. B. HC5050, HC5090) compare to the list.
Question 4: Do I need tools for installation? Answer: No. The shaving head is inserted compatible with Braun Hair Clipper and snaps into place. After insertion, turn on briefly and check the barrel.
Question 5: What care is recommended? Answer: Clean after each use, dry completely and economical oils. This preserves the cutting quality and supports the service life of the Braun cutting system 81428925.
Package Dimensions : 4.5 x 4 x 1.5 cm; 10 g
Date First Available : 21 Sep 2025
Manufacturer : NaschLager
ASIN : B0FRZJWLM1
Item model number : 81428925-NL51
Guaranteed software updates until : unknown
Customer reviews: 5.0 5.0 out of 5 stars (5) var dpAcrHasRegisteredArcLinkClickAction; P.when(‘A’, ‘ready’).execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( ‘acrLink-click-metrics’, ‘click’, { “allowLinkDefault”: true }, function (event) { if (window.ue) { ue.count(“acrLinkClickCount”, (ue.count(“acrLinkClickCount”) || 0) + 1); } } ); } }); P.when(‘A’, ‘cf’).execute(function(A) { A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { “allowLinkDefault” : true }, function(event){ if(window.ue) { ue.count(“acrStarsLinkWithPopoverClickCount”, (ue.count(“acrStarsLinkWithPopoverClickCount”) || 0) + 1); } }); });
Compatible with Braun HC Series: cutting system 81428925 suitable for Hair Clipper HC3050 HC5010 HC5030 HC5050 HC5090 also HC5310 HC5330 HC5350 and CruZer5 head; suitable for type 5427 or 5429, type Number on the back of the device. Check
Fully pre-assembled cutting unit compatible with brown: movable top and fixed base made of stainless steel, torsion springs on both sides and guide rods, precise guidance, quiet running thanks to factory lubrication; robust carrier plate in black, tooth comb finely toothed, designed for exact hair and beard trimming
Tool-free installation compatible with Braun HC models: remove old head from the front, clean seat, clamp new unit, check firm fit; suitable as a replacement for blunt teeth, pulling or after a fall, cutting performance is restored
Care instructions compatible with Braun HC devices: brush hair after each use, rinse briefly and dry completely, apply 1-2 drops of cutting oil to the teeth; regular care reduces friction and noise, prolongs blade life and drive mechanism
Scope of delivery compatible with Braun HC series: 1 x cutting system 81428925 blade block shaver head in black with stainless steel blades, suitable for type 5427 5429; no comb attachment included, not intended as a replacement for shaving foil, not suitable for BT beard trimmer, MGK multigromer or foil cleaner
